Micropower Group AB

Idavägen 1
352 46 Växjö
Sweden

+46(0) 470 72 74 00
sales@micropower.se
support@micropower.se

LinkedIn

Micropower Support Center
SHARP 100
Output Voltage
48 V
Output Current
100 A
Number of phases
3
Rated Voltage range
208-240 V
Shipping Weight
22 kg
Ingress protection
IP20
Certifications
CE
Current at nominal voltage
18.5 A
8 Hours cap.ah/5h
833
12 Hours cap.ah/5h
1334
Cabinet Type
S18

Download datasheet

SHARP 100

SHARP 100 48/100

SS4423

Sharp 100 48V/100A industrial battery charger. 
Sharp 100 is a 3-phase industrial battery charger with capacity up to 10 kW. The charger can be powered by all commonly existing mains voltages and many of the models are certified to UL and CSA standards for use in the USA and Canada by Underwriters Laboratories.

SHARP SERIES

The Sharp series consists of energy-efficient High Frequency industrial battery chargers. They are regulated, primary switched chargers with charging curves that suit most battery types and applications. The charging process is optimized so that the battery is fully charged in the shortest time possible, with as low water consumption and wear on the battery as possible. Many of the Sharp chargers are a perfect choice for onboard charging.

CHARGING

The Sharp battery chargers are controlled by the integrated microcomputer. The chargers are equipped with 1 to 3 charging curves as standard, including in most models one with ionic mixing, which efficiently reduces the charging time.

STATUS

Charging progress is indicated by a diode that glows orange during charging, green at full charge and flashes red if an error occurs.

SAFETY FUNCTIONS

– The charger requires a counter voltage from a battery in order to start.
– The outlet is protected electronically against faulty connections and short-circuit.
– The charger works with different shutoff times. If these times are exceeded, the charger is turned off.
– Automatic output limitation if cooling is insufficient.
– Soft start before the charger reaches full output.

Safe Disconnect

All our industrial High Frequency battery chargers will automatically start when the battery charger is connected to the battery. Likewise it will automatically stop when the charger is disconnected. This option eliminates the risk of sparks when disconnecting the battery charger.